We specialize in hard to find items
All Categories
OVERTURE Air PLA Filament, Pre-Foamed PLA Low-Density, Lightweight PLA, Cardboard Spool, 0.82kg(1.8lbs), Dimensional Accuracy +/- 0.02mm (Wood)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
OVERTURE Air PLA Filament, Pre-Foamed PLA Features
-
【Foaming Process】AIR PLA is a low-density foamed PLA, the foaming process allows the filament to have a lower density than ordinary PLA, making the print quality lighter (compared to about 80% of the weight of ordinary PLA)
-
【Density stable】The pre-foaming process is adopted, and the foaming is completed during the wire making process. Compared with the filament of Foaming When Printing, it has higher printing density stability and is better at suppressing stringing
-
【Application】AIR PLA has the potential to print lightweight parts because of its low density. It can be used to print models such as drones and RC-planes, or for the manufacture of cosplay props
-
【Mechanical Properties】Density: 0.9 g/cm3 at 23°C; Tensile strength (X-Y): 24.4 +0.3 MPa; Charpy impact strength (X-Y): 2.4 +0.3 kJ/m2; Bending modulus (X-Y): 1958.9 土72.6 MPa; Elongation at break (X-Y): 8.8土0.3%; Elongation at break (Z): 2.0土0.4%
-
【Cost-effective and Wide Compatibility】With over 9 years' 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more
About OVERTURE Air PLA Filament, Pre-Foamed PLA
Description: These 1.75mm PLA filaments are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, eco-friendly and safe, with no odor during the printing Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied. FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature. 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure an strong first layer adhesion. 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate. 4. If the effect is not good, it is recommended to try printing the draft before printing. Specification: Temperature Recommended Extrusion/Nozzle Temp: 190°C - 210°C Heated Bed Temp: 25°C - 60°C Filaments Diameter and Accuracy: 1.75 mm +/- 0.02 Print Speed: 30-50 (mm/s) Filaments Net Weight: 0.8 kg (1.76 lbs) Packaging Included:1 × spool of Air PLA filament
