SUNLU 3D Printer Filament PLA Matte 1.75mm, Super Neatly Wound 3D Printing Filament with Matte Finish, Print with 99% FDM 3D Printers, 1kg Spool (2.2lbs), 330 Meters, Matte Pink

Pay with

SUNLU 3D Printer Filament PLA Matte 1.75mm, Super Features

• 🎄【SUNLU 100% Wound Neatly 3D Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound 3D Printer Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.

• 🎅【PLA Features & Matte Color】- SUNLU's newly upgraded Matte PLA Filament colors retain the original SUNLU PLA advantages: Easy Printing, No Clogging, while adding more color options. Matte PLA can print prints with non-glossy colors and frosted textures, suitable for more premium and mysterious 3D models.

• 🎄【Stable Dimensional Tolerance】- SUNLU PLA MATTE Filament Dimensional Accuracy +/- 0.03mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, easy handling, resulting in an outstanding surface finish and are highly precise.

• 🎅【Recommend Settings & Easy to operate】- We recommend printing the PLA Matte Filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s. The length of the filament can reach about 330 Meters. The operation is very simple and suitable for novices.

• 🎄【No Odor & No Bubbles】- SUNLU 3D Printer Filament are mainly made of corn starch, which is odorless when printing. Vacuum sealed, there is also a desiccant package, vacuum packaging to avoid dust and keep the filament dry.

• 🎅【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.

About SUNLU 3D Printer Filament PLA Matte 1.75mm, Super

FAQ: ● Why can't the filaments stick to the build bed easily? ● Please do 3 steps checking！ ① Temperature Please check the temperature(bed and nozzle) settings before printing and set it suitable. ② Building Bed Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed. ③ Speed Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s). Recommended Settings: ● Nozzle 210°C - 235°C (410°F - 455°F) ● Bed 70°C - 80°C (158°F - 176°F) ● Printing Speed: 40-80(mm/s) ● These settings are for 0.4mm nozzle, it may be different with different diameters nozzle Notes ● Please insert the filament into the side holes after use to avoid tangles. ● Feel free to message us if you have any questions about the filament. ● Please stored the 3D printer filament in a sealed bag or box after using it.