All Categories
Unique Protection --- Daly parallel module + Daly Bms is specially designed for parallel lithium packs, it is an integrated, combined customized parallel package protection. This combination can limit to mutual high charging current caused by the internal resistance and voltage difference between the parallel lithium batteries while charging the parallel packs. With Daly-BMS + Daly parallel module, higher voltage for electrical devices is safe and easy to achieve.
Application note: Daly bms + DALY parallel module cannot be used separately, types and strings of the BMS + parallel module, battery packs must be exactly the same. For example (3.2V Lifepo4 4S 12V 280Ah [capacity may vary a little, such as 280Ah + 120Ah] battery packs) + (DALY smart bms lifepo4 4S 12V 100A + DALY 121A parallel module) is workable; Daly parallel module cannot be used with other brands of Bms mmmmAly Bms You have bought before or separately!
Basic parameters: all 1A parallel module dimensions in this link are the same: 63 x 41 x 14 mm, bms dimension refer to the list page, current limit: 1 A; parallel module is triggered by: 1 - range to overcharge current point at warning level 2 or 2 reach to built-in/preset valve value. Operating Temperature: -20℃~70℃ Parallel Module Release State: Discharge Communication Wire: 22AWG, Length = 300mm
Intelligent and easy cabling --- All Bms with UART + RS485 + CAN function and protocol, with Bluetooth dongle and DALY BMS app, you can check all real-time battery parameters and make the correct settings in specific areas. Do not connect the parallel module to the BMS before all balance lines wire each battery cell. Please connect BMS to the battery first, and then connect the parallel module to BMS.
Each package --- Smart Bms with CAN communication function + balance wire + NTC + Bluetooth module + 1A matched parallel module + communication cable. And this BMS and parallel module is customized, each purchase quantity should be at least 316 sets. !
Dongguan Daly Electronics Co., Ltd. was established in 2015, integrating R & D, production and sales, and specilizing in the production of lithium battery protective boards, such as LiFePO4 BMS, NMC BMS, LTO BMS, which can be used to energy storage, electric vehicles, electric tools, electric wheelchairs, AGVs, and forklifts, etc. The specifications of Daly BMS are 3S – 32S, 12v-120v, and 5A-500A. Smart BMS, BT, UART, RS485, can, LCD and GPS are very popular in Europe, Asia and North America.If you need a customized BMS or bulk order, please feel free to contact us!