We specialize in hard to find items
All Categories
SUNLU 3D Printer Filament Pack, 0.25kg Each Spool, Total 2kg, Mini Spool, PLA+ Filament 1.75mm, 8 Packs, Black+White+Grey+Burlywood+Bluegrey+Pink+GrassGreen+Purple
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
SUNLU 3D Printer Filament Pack, 0.25kg Each Features
-
【2kg in Total, 0.25kg per Spool, 8 Rolls of 0.25kg 1.75mm PLA+ Filament】8 rolls of 250g SUNLU 1.75mm PLA plus filament. Color: Black+White+Grey+Blue+Green+Red+Orange+PureYellow. The design of 250g PLA+ filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users.
-
🎅【Small Spool Diameter】- Spool Diameter: 120mm(4.7inches), Spool Width: 43mm(1.69inches), Spool Hub Hole Diameter: 42mm(1.65inches). 250G spool size of the SUNLU filament mini spool is suitable for hanging on a lot of FDM 3D printers.
-
🎄【SUNLU 100% Wound Neatly Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.
-
🎅【SUNLU PLA PLUS 3D Filament Advantages】- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.
-
🎄【1.75mm Diameter】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
-
🎅【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F).
-
🎄【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.
About SUNLU 3D Printer Filament Pack, 0.25kg Each
FAQ: ● Why can't the filaments stick to the build bed easily? ● Please do 3 steps checking！ ① Temperature Please check the temperature(bed and nozzle) settings before printing and set it suitable. ② Building Bed Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed. ③ Speed Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s). Recommended Settings: ● Nozzle 210°C - 235°C (410°F - 455°F) ● Bed 70°C - 80°C (158°F - 176°F) ● Printing Speed: 40-80(mm/s) ● These settings are for 0.4mm nozzle, it may be different with different diameters nozzle Notes ● Please insert the filament into the side holes after use to avoid tangles. ● Feel free to message us if you have any questions about the filament. ● Please stored the 3D printer filament in a sealed bag or box after using it.
