SI FANG Mini Chamfering Machine, 45 Degree Manual Linear Pneumatic Chamfering Tool, High Precision Blade Type Air Beveling Tools Edge Beveler, for Metal Trimming, Arc Corner Deburring

Pay with

SI FANG Mini Chamfering Machine, 45 Degree Manual Features

• 【Easy Operation】: This 45-degree Pneumatic mini chamfering machine air tools has a new lightweight design, small and exquisite, and can be easily operated with one hand. Use the matching wrench to easily adjust the chamfer size and replace the blade.

• 【Adjustable Speed and Angle : 】: The portable deburring trimming chamfering tool air grinder 1-5 block valve adjustment thickened knob, freely adjust the gear speed you need. The chamfer size can be adjusted at will. The safety switch is used to prevent accidental touch to protect the user's safety at all times. 1/4 inch metal filter, free speed: 30000 RPM, air consumption 0.4/min.

• 【Stable Speed】: Pneumatic metal beveling tool chamfering tool can withstand high impact and high speed, with little vibration, low resistance and lower loss. The speed is increased and the chamfer is smoother, and the beveling machine is more durable.

• 【Higher Cutting Efficiency】: The upgraded version of the pneumatic chamfer tool, the new design adopts a new chrome-plated all-aluminum shell with high-quality bearings, and is equipped with high-precision heat-treated blades for better use and smoother deburring and chamfering.

• 【Purpose】: SI FANG's air beveler grinder Portable Deburring-Trimming chamfering tool adopts the thinnest nut lock bearing at present, which can chamfer in the narrowest and shallowest space, and is suitable for various angles, such as straight edge chamfering, inner and outer round hole chamfering, and irregular chamfering. Angle, keyway polygonal chamfering. Deburring tool for metal trimming and round R side

About SI FANG Mini Chamfering Machine, 45 Degree Manual

Features: The current thinnest outer 1mm hexagonal nut lock bearing is adopted, and the bearing adopts 3x7x3mm size as an auxiliary. It can be chamfered in the narrowest and shallowest space, suitable for various angles, such as straight edge straight chamfering, inner and outer round hole chamfering, Irregular chamfering, multilateral chamfering of the keyway. Used for deburring and chamfering the R side of metal trimming arc corners. The chamfer size can be adjusted at will: Loosen the 2 screws of the black gear plate with a thinner Allen key, twist the black gear plate left and right, adjust the chamfer size, and fix the 2 screws back to the original position Change blade operation: Loosen the triangle blade screw with a thicker Torx wrench, replace the blade with a new one, and fix the screw again. Maintenance and oiling instructions for pneumatic chamfering machine: If the pneumatic chamfering machine is used for a long time, it is recommended to inject about 4cc of pneumatic tool oil into the air port (if there is no special tool oil, other engine oils are also available), it runs smoother and has lower noise during work. Specification: Name: Mini Pneumatic Chamfering Machine Color: silver Speed: 3000rpm Pressure: 0.6~0.8mpa Air consumption: 0.4/min Connector: 1/4inch Chamfer size: 0~2mm Finish: N5 Chamfer aperture: >8mm Chamfer plate thickness: >3mm Hole depth: >5mm Chamfer angle: 45 degrees Machine chamfer size: 0.1-0.9mm adjustable Air intake adjustment: 1-5 gears adjustable Package Content: 1 x Mini Pneumatic Chamfering Machine 1 x interface 2 x Wrench 1 x Analysis Chart