ELEGOO Water Washable 3D Printer Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing 1000Gram Mint Green

Pay with

About ELEGOO Water Washable 3D Printer Rapid Resin LCD

Does it bother you when you clean 3D printed resin model using ethanol? Does it worry you when you keep a full tank of ethanol in your lab or warehouse? All the problems now have a perfect solution. ELEGOO Water Washable photopolymer resin is a significant breakthrough and no more hassle for cleaning resin model from now on! After your model is complete, put them in a container full of water and shake it or wash it under the faucet if you prefer. Save your time and save your money. Usage condition : 1) Shake up the bottle before use and avoid direct sunlight and dusty environment 2) Do not drink it and keep it out of the reach of children 3) Please wear a mask and gloves when using to avoid direct skin contact and maintain indoor ventilation 4) If you got skin contact, please wash away with waters immediately, and if you feel discomfort, please see a doctor ASAP. 5) Once the model is complete, please wash it with water for 30 seconds at least and dispose of the waster properly 6)If you don't use the resin, please do not leave them in the resin tank over 48 hours or put them back to its original bottle and seal it. Material Properties : Curing wave-length: 405 nm Hardness: 79.0 D Shrinkage: 7.1 % Viscosity (25°): 552.0 mpa.s Liquid density: 1.100 g/cm³ Solid density: 1.184 g/cm³ Tensile strength: 23.4 Mpa Elongation at break: 14.2 % Shelf life: 1 year(see production date on the label)