"AD24-50" DC 24V Motorized Actuators(Excluding Ball Valve) – by VALCON (DC 24V (Waterproof), 5-wire(20 N.M))

Pay with

"AD24-50" DC 24V Motorized Actuators Features

• Application the ball valve types

• CE, RoHS Certifications

• Long life cycle & Manual Function

• Watchdog the ON/OFF

• Temperature and timer setting(all parts organized)

About "AD24-50" DC 24V Motorized Actuators

Actuator Model: AD24-50 Control :DC Contact point control Power : DC24V (1A) Consumption Power : Approx. 3W (in no-load operation) Standby Power : Approx. 0.25W (in completed) Max. Output torque : 200Kgf‧cm Weight : Approx. 845g Rotation Direction : Closes clock-wise / Opens Counter-clock-wise / (TOP VIEW) Operating time : Approx. 8sec (90° operating basis) Mechanical Life Span : Approx. 100,000 Cycles Operation Environment : indoor IP Rating : IP 67 Certification : CE, RoHS Operation Temperature (Humidity) : room temperature (35 ~ 85% RH) ※ The yellow line and green line are used for the operation completion confirmation device, and there is no problem in opening / closing the electric actuator without using it (Insulate the unused wires with insulation tape or a suitable material with the same function to prevent short-circuiting) Installation Specifications 1. Compose system that can control by close-operating Red(DC 24V + conductor), black (DC 0V - conductor) / Open-operating Red (DC 24V + conductor), white (DC 0V - conductor) & black (DC 0V - conductor). Do not stick other wires to the red wire (+ pole) 2. The open/closed status of the electric ball valve can be checked using the yellow line and the green line 3. Attach the power supply unit with a switch or disconnecting device for emergency power off 4. Connect an overcurrent cut-off device to the power supply for circuit protection CAU TION 1. Be sure to read the product manual enclosed in the product before installation 2. Refer to the wiring diagram of the electric actuator for wiring carefully