All Categories
1 piece
BOSS pedals are delivered ex works with a battery attached, so the available power may vary. With the pedal, the circuit is activated as soon as a 6.35mm (mono) jack cable is plugged into the output jack. Regardless of whether the pedal is activated (looping) or not, the battery discharges. The average life is about 2 hours.
Don't leave the cable plugged in overnight
Remove all batteries from the battery compartment, replace with a new, fresh (non-rechargeable) 9V battery, and then plug a mono or TS cable into the output socket. Both the power LED and the screen should then be activated. BOSS pedals also work with a 9-volt power supply. To check if the pedal is working, it should be tested with a battery first. Then removed the battery and an official BOSS Inserted the power supply and tested the pedal in the same way.
Your creative companion — always by your side With the RC-5, you give your pedalboard maximum looping power. Record in high-quality 32-bit sound quality, navigate through parameters via the backlit LC display, keep an eye on the loop status and benefit from extended control options via external foot switches and TRS MIDI I/O. the RC-5 puts all the power of music at your feet.