We specialize in hard to find items
All Categories
Waterproof Iron-On Seam Sealing Fabric Fusing Adhesive Repair Tape for Dry Suit Wader Rain Jacket River Pants Clothing (Grey, 5M)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Waterproof Iron-On Seam Sealing Fabric Fusing Features
-
Hot melt seam sealing tape-nylon or polyester tricot backer,waterproofness- 20,000mmH2O and breathability 10,000g/m2/24hr higher than the competition
-
5M[2cm(W) x 5.46 yd(L)] length of hot melt seam sealing tape,Using a household iron at moderate temperature(302°F-320°F) and medium/hard pressure for 10-15 seconds,Only white side is adhesive.
-
Seam sealing tape heat applied to sealing sewn seams / repairs on Gore fabric and a wide variety of similar waterproof breathable textile-drysuit,waders,waterproof rain jacket,outdoor pants,wetsuit,tent,neoprene stockingfoot
-
Iron-on tape that provides a waterproof and long lasting finish to sewn or welded seams of neoprene,fix 2-layer/3-layer/4-layer/5 layer high performance waterproof breathable textile.Seam tape features additional strength to the seam and stretches in every direction to provide a longer lasting bond,excellent performance and durability
-
FULL CUSTOMER SUPPORT - Our customer support team is available 24/7 to answer any question and solve any situation. If you’re not satisfied with your new waterproof seam tape,we’ll happily give your money back
About Waterproof Iron-On Seam Sealing Fabric Fusing
Description Size 5M - 16.4 Feet:2cm x 5.46yd(W) Tools:Iron,tape Step: A. Firstly,find out the location of the leak.this can be done by wearing the gore-tex clothes in water for a short time and then checking the inside for a “wetspot”. B. Turn the Gore-tex garment inside out,and clean damaged area by a dry cloth for repair. c.Covering the seam tape with a piece of paper or cloth is a good technique that will help shield and protect your iron and the tape D. Using a household iron at moderate temperature(302°F-320°F).You will patch the inside of the 3-layer fabric. Cover small tears and holes by enclosed adhesive tape by 2/5" larger.Keep the adhesive side down,place over the hole,and medium/hard pressure for 10-15 seconds. E. After the seam tape cools, check for any loose edges and use the iron again if necessary. Repairs should appear the same as taped seams inside the garment.
