BIGTREETECH Direct TFT50 V3.0 5.0" Dual Mode Ultra Clear 3D Printer Display Screen 12 White LED Lights 3D Printer Part

Pay with

About BIGTREETECH Direct TFT50 V3.0 5.0" Dual Mode Ultra

√Thank you for your support, If you have any question within using,pls feel free to contact "BIGTREETECH Direct" via Amazon directly, we till get back to you within 24 hours. √Ⅰ. Introduction BIGTREETECH TFT50 V3.0 is a display screen with middle size, two operation mode and super clear launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD., which can perfectly replace LCD12864. √1. Features ： √1. MCU: ARM 32 bit and 120MHz STM32F205/207VCT6 of Cortex-M3 series. √2. More convenient operation: upgrading the firmware by SD card. √3. Stronger compatibility: two working model, UART screen and screen of 12864 types. √4. UART screen supporting SD card and U disk. √5. Having WIFI port, plugging WIFI module can achieve WIFI function. √6. Having filament runout detection function port (FIL-DET). √7. Having function port for automatic shutdown after printing(PS-ON)； √8. LCD12864 mode including EXP1、EXP2、EXP3，EXP1and EXP2 is for LCD screen of ordinary motherboard, and EXP3 is for LCD screen of E3 series(like: SKR MINI E3、SKR E3 DIP etc.). √9. TFT touch screen: UART screen RS232 port. √10. Having 2 UART port for users DIY. √2. Parameters ： √Appearance size: 149*77.5mm √Installation size: 141*69.5mm √MCU: STM32F205/207VCT6 √Screen display area: 110.88*62.832mm √Display resolution: 480（RGB）*272 √Backlight: 12 white LED lights √Power input: DC 5V √Logic voltage of SD card: 3.3V and 5V (like: supporting motherboard with control chip MEGA2560, with stronger compatibility) √Notice: Explanation: √1. Connecting EXP1 and EXP2 on motherboard when using screen of 12864 types. √2. Connecting the TFT or AUX-1 on motherboard by RS232 when using UART screen mode. √23. Two model switch: press the encoder about 3S until the mode selection page appears, then select the mode and press it.