1/4" NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by AOMAG

Pay with

1/4" NPT Brass Electric Solenoid Valve 12V DC Features

• VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket.

• ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized.

• -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W.

• 1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US..

• PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our AOMAG Motorized Ball Valves.

About 1/4" NPT Brass Electric Solenoid Valve 12V DC

AOMAG Normally Closed Electric Solenoid Valve; 1/4”ports, brass body, Viton seal, 12 volt DC, for air, water, or fuelAOMAG Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with three-eighth inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton gasket.The direct current coil energizes at 12 volts DC;voltage range +- 10%. 18 Watt power rating.Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 128 PSI; for oil: 0 to 99 PSI; for air or gases: 0 to 128 PSI.(4 mm) flow aperture permits a unidirectional flow capacity of 0.6 gallons per minute (GPM) of water at 60oFwith a pressure drop of 1 PSI (0.6 Cv).Operational temperature range (steady state) -5 to 80 Celsius. It is also designed to withstand short exposures to 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater.Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve. In cases where this is necessary, it is recommended user install a computer fan to keep valve cool.Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis system, electronic control of tank selection, water line, or motorcycle air shocks.Manufactured in China. Model: USS2-00006. Quality and/or conformity managed in accordance with standards:ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.