milKit Tubeless Rim Tape - 11yd (10m) Rim Strip Roll - Extra Strong Bicycle Rim Tape 21mm -25mm - 29mm - 32mm Available Widths (21)

Pay with

About MilKit Tubeless Rim Tape - 11yd (10m) Rim Strip

🚴‍♀‍ milKit rim tape offers quick and easy conversion of your rim to tubeless and guarantees a reliable and long-lasting performance. We designed our rim tape to be very strong and reliable for an airtight fit, but with enough flexibility to make installation quick and easy. 🚴‍♀‍ milKit rim tape is available in the four most popular widths on 10m/11yd rolls. One role is sufficient to set up 4-5 wheels. Using milKit rim tape: 1. Clean rim thoroughly and ensure it is dry 2. Install rim tape by pushing it firmly into the rim       - It must be tight and ensure there are no gaps or air trapped underneath       - Make sure it overlaps at least 10 cm / 4 in over the valve hole, it's better to have a longer overlap than shorter       - Use two layers for high pressure wheels (above 8 bar / 120 psi) 3. Cut rim tape at a 45° angle for best adhesion and flexibility 4. Install milKit tubeless valves into rim: pinch just a small hole into the rim tape and push valve through tape into rim ❗️ Choose a rim tape width that matches the inner width of your rim or is slightly larger. The rim tape should cover the whole rim base and it can even cover a part of both sides. ❗️❗️ Using too narrow rim tape can lead to air leaking between rim and tape - which can be frustrating. If it is too wide it can make it difficult for the tire to sit correctly.