GREDIA 3/8" Oil Flow Sensor High Density Liquid Food-Grade Switch Hall Effect Flowmeter Fluid Meter Gear Counter Connect Hosepipe 5-600L/H for Fuel Gasoline Diesel Milk Detergent Water

Pay with

GREDIA 3/8" Oil Flow Sensor High Density Liquid Features

• G3/8 inch, connect to a hosepipe, interface diameter:12.6mm

• Flow range: 5-600L/H, Power supply: 3.5-12V

• F = (2.5* Q) ± 1%, Q=L/Min, error: ± 1%, Working liquid temperature range: 0-80℃ (0-176°F)

• Material: food grade plastic, all raw materials conform to the ROHS test standard

• This product is mainly used for liquids with high concentration such as milk, detergent, diesel oil, motor oil, chemical industry and paint.

About GREDIA 3/8" Oil Flow Sensor High Density Liquid

Our products are fine made with nice materials and good workmanship, strict quality control, guarantee in after service. Features: 1. The appearance of this product is light and handy, small in size, easy to install. 2. The stainless steel beads are set inside the impeller, which is always wear-resistant. 3. The sealing ring adopts the structure of the upper and lower force, never leaking. 4.Hall components are imported from Germany and encapsulated with potting glue to prevent water ingress and never aging. 5. All raw materials comply with ROSH testing standards. More details about the flow meter: Flow range: Flow range: 5-600L/H (1-30L/Min) Power supply: 3.5-12V Pulse frequency (Hz): F = (2.5* Q) ± 1%, Q=L/Min, error: ± 1% Operating voltage range DC 5～18 V Rated working voltage: DC 5-24 V Load capacity: ≤10 mA (DC 5V) Water Pressure: ≤1.75Mpa Liquid temperature: 0-80℃ (0-176°F) Operating humidity range: 35%～90%RH (no frost condition) Storage temperature -25～+80℃ Storage humidity 25%～95%RH Size: 103mm x 47mm x 38mm(L*W*H) Cable: 50 cm Refer to the wiring: Red wire: VCC(+) Black wire: GND(-) Yellow wire: Pulse Signal output Package: 1 x G3/8 inch oil flowmeter connect hosepipe