iFJF R12T Fuel Filter/Water Separator 120AT NPT ZG1/4-19 Automotive Parts with Fitting - Filter and Water Collection Bowl Diesel Engine (R12T Filter)

Pay with

About IFJF R12T Fuel Filter/Water Separator 120AT NPT

Product details: 1.Port/Connecting Size M18 X 1.5 Center Thread. 2.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers. 3.The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance. 4.Fuel Water Separator Filter fit 3/8 Inch NPT Outboard Motors as well. 5.Filter Rating 10 Micron.10 micron filters are over 90% efficiency at removing particles as small as 10 microns. 10 micron filters are recommended to protect sensitive inboard,sterndrive and outboard fuel injection systems.Designed to trap the smallest particles and emulsified water from Diesel. Product details: 1.Don't be caught in the water without one of these Diesel spin-on filters. 2.Filters are designed for high performance applications, and with flow rate of 15 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. 3.The inlet and out let can be feed in on the same side or in one side out the other side. 4.Check and replace regularly. R12T water separator and filter complete combo installation instruction: 1.Nylon collection bowl down when installed the water separator and filter. 2.There are 4 ports, two inputs and two outputs.We provide two plugs for the extra two ports.If you need to use two plugs,you must install them to the filter and tighten them. 3.Before installed the filter,you have to remove those plugs,teflon-tape them,and re-install them.Prevent leaks from these plugs. 4.All of the above steps are very easy to operate,you'd better use the tool to install tighten.