We specialize in hard to find items
All Categories
Taidacent Blue Color High Precision 5 Digit Amp Meter DC 0.0000-3.0000A Ammeter Digital Display DC Digital Ammeter Resolution 0.1mA
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Taidacent Blue Color High Precision 5 Digit Amp Features
-
Range: DC0-3.0000A
-
Display: five digits 0.36LED
-
Opening size: 45.5mm*26.5mm
-
Flexible power supply: no need for isolated power supply, you can use the common ground power supply system.
-
Small size: only 48mm*29mm*21mm
About Taidacent Blue Color High Precision 5 Digit Amp
The basic performance parameters of the ammeter are as follows: Range: DC0-3.0000A, the maximum reservation can be measured 5A, the accuracy of 3A or more has a slight influence Display: five digits 0.36LED Digital tube display color: red (because the cost of different colors of digital tube is not the same, so the price is not the same, other functions are the same) Refresh rate: >3 times per second Measurement accuracy: ± (0.5 ‰ + 2 words) (meaning that the maximum error of the table is within 1.7mA, the normal error is less than 0.5mA) Supply voltage: DC3.5-30V Working temperature: -10 ° C ~ 65 ° C Opening size: 45.5mm*26.5mm (the opening directly snaps the watch into the panel) Dimensions: 48mm*29mm*21mm Temperature coefficient: less than 50PPM/°C Features: 1, flexible power supply: no need to isolate the power supply, you can use the system's common power supply. 2, small size: the external dimensions are only 48mm * 29mm * 21mm 3. High precision: The measurement range is 0-3.0000A over the traditional 0-2.0000A header. Thin red line: the positive pole of the power supply, need to connect the positive pole of the DC range of 3.5-30V Fine black line: power supply negative pole (when it is connected to the thick black line through system, it needs to be suspended) Thick red line: current measurement signal input positive Thick black line: current measurement signal input negative Note: The header needs to be powered independently. The power supply range is 3.5-30V DC. When the red and black wires are connected to the power supply, the meter will display 0.0000 (very few possible 1). At this time, the thick black line and the thick red line can be connected in series. Into the circuit under test.
