BIGTREETECH TFT35 V3.0.1 Touch Screen Display RepRap Smart Controller Panel 2 Working Modes Compatible with SKR V1.4/SKR 2 3D Printer Parts

Pay with

About BIGTREETECH TFT35 V3.0.1 Touch Screen Display

Product Characters 1，Reserve the extension port of filament breaking detection (FIL-DET) 2，Reserve the extension port of automatic shutdown after printing (PS-ON) 3，LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard, EXP3 is the LCD screen port used by SKR MINI E3 and SKR E3 DIP 4，TFT touch screen mode uses serial port screen RS232 port 5，2 sets of UART serial port extension ports are reserved for DIY use Product Parameters Appearance size: 110*58mm Microprocessor：STM32F207VCT6 Power Input：DC5V SD card logic voltage：3.3V or 5V, support MEGA2560 motherboard, with higher compatibilityFirmware Introduction All boards will be equipped with test firmware before shipping out, it can be used directly. User can also change the firmware according to their own need. 1. Ways to obtain the firmware of motherboard 1)Get it from customer service or technical staff 2)Log in the open source website of our company to download: https://github.com/bigtreetech 2. Firmware update Firmware file name： BIGTREE_TFT35_V3.0.(version number).bin First copy the above firmware to SD root directory, and then insert the card into the SD card slot of the board. Next please re-power the board or press the reset key, and wait for about 10 seconds before the update is completed. 3.For DIY board firmware, please refer to the file TFT35-V3.0-PIN. Package Included TFT35 V3.0*1 Connection Wire*3