JODROAD Shielded RJ45 CAT5 CAT6 Pass Through Connectors - Pass Through Modular Plugs Gold Plated 3 Prong 8P8C Ethernet Ends for Solid Wire and Stranded Cable(50pcs)

Pay with

JODROAD Shielded RJ45 CAT5 CAT6 Pass Through Features

• ✅ PASS-THRU ETHERNET CONNECTOR Are compatible with multi-stranded ,single-stranded and solid cables ,supporting 23 to 26 AWG round or flat network cable. They work with virtually every model of RJ45 passthrough crimper tool.IF YOU WANT TO BUY BIGGER HOLE DIAMETER RJ45 PLUG,PLEASE GET ACCESS TO B07V4K9L14(1.2MM),B08ZLYGL7M(1.3MM)

• ✅ MORE EFFICIENT EXPERIENCE Pass-through design allows the installer to verify the proper wiring order before crimping so that eliminate scrap and improper crimps.the excess wire is trimmed during the crimping process providing a quicker and more efficient experience.

• ✅ EXCELLENT SHIELDED PERFORMANCE Metal-shielded shell prevents outside electromagnetic interference that can be caused by nearby power lines or appliances.RJ45 plugs cooperate with Shielded Ethernet Cables to use, the shielded effect is better.

• ✅ GOOD PERFORMANCE Adopting 3 prong Gold plated chip ,stronger antioxidant performance and the contacts are closely attached to core and contacts is more stable.

• ✅Important Information:only work with shielded or unshielded cable(twisted pair or solid cable) with insulated conductor diameter of 1.00-1.06mm. Confirm your cable meet above needs.To do this, please consult your cable's user manual, contact the seller, or check the manufacturer's website.

About JODROAD Shielded RJ45 CAT5 CAT6 Pass Through

Custom Ethernet cables made easier and handily -Simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. -Pass-through connectors allowing for the wires to feed through the connector for easier alignment can easily verify the proper wiring order. Reliable,compliant performance ✅Pass Through RJ45 Connectors are fully RoSH, UL and FCC compliant. ✅Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector ✅Reduces the distance between the wire twists and contacts improves performance.   Specification: Cable Type: 24AWG Cat6/Cat5E Ethernet/Solid cable Hole Diameter: 1.1 MM Recommended fit cable OD from 1.0-1.06 MM   Tips: 1.Please straighten the wires and cut it neatly so that pass through easier 2.Please check that individual wire and connector's metal contacts are close contact if cables you made with these connectors failed connection tests. Please do not hesitate to contact us if any queries .Thank you