Ecotex HOT Pink Water Based Discharge Ink for Screen Printing - Non Phthalate Formula for Fabric/Textiles - PINT-16 oz.

Pay with

About Ecotex HOT Pink Water Based Discharge Ink For

Shipping Allow 1-3 Days DISCLAIMER: Color swatches are for reference only and is not to be used for final color matching. Shades may vary due to the color and resolution of your computer screen and/or your particular color printer output. We are not responsible or liable for color matches made with online color swatches. Mesh Guidelines 160-305 Emulsion Recommendations We recommend using WR-Blue or DC-Pink, both require mixing diazo. Degrease your screen before coating emulsion, Hyper Haze will degrease and remove stains/ghosts. Recommended Clean Up Ecotex Water Based Screen Cleaner Mixing Information Water Based Printing:Our ink can be used straight out of the bottle as a traditional water-based ink. We recommend only doing this technique on light color garments Discharge Printing:This ink can also be used a discharge ink by adding the discharge powder. When using as a discharge ink, add just enough powder for the amount of ink needed during that print run. This will be somewhere 3-5% by weight. Mix thoroughly to make sure no chunks or grains are visible. Once the powder is added to the ink it will last for roughly one hour. Flash and Curing Guidelines: Flash forced air flash is optimal. For curing should be a minimum of 90 seconds at 320F. For best results 2-3 minutes at 300-320F. General Testing Before you do any large print, we recommend doing a stretch and a wash test to ensure you cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers best results will be seen on 100% cotton. Synthetic fibers will not discharge properly.