Aluminum Pop Rivets 1/8" x 5/8" Dome Head Blind 4-10 Gap .501" - .625" Quantity 100 by Fastenere

Pay with

Aluminum Pop Rivets 1/8" x 5/8" Dome Head Blind Features

• Dome head is the most commonly specified rivet head style because of its low profile and clean finished appearance. It is slightly rounded and twice as wide as the rivet body diameter.

• Made of Aluminum Alloy 5050, 5052, or equivalent. Aluminum alloys have excellent corrosion resistance.

• The aluminum mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. Aluminum/Aluminum rivets have the lowest tensile and shear values of all break mandrel rivets.

• An aluminum blind fastener which has a self contained mechanical feature (a mandrel) which permits the formation of an upset on the blind end of the rivet and expansion of the rivet shank during the setting to join the component parts of an assembly

• Fastenere branded open end blind pop rivets meet SAE J-1200 Standards which establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use in joining the component parts of an assembly.

About Aluminum Pop Rivets 1/8" X 5/8" Dome Head Blind

Open end blind rivets are tubular rivets with a mandrel through the center. The entire rivet assembly is inserted into a hole drilled through the parts to be joined, and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and snaps off the mandrel.Detailed Techincal InformationRivet Trade Number: 4-10Rivet Size: 1/8" x 5/8"Head Style: Dome HeadHead Diameter: 0.238"Head Height: 0.04"Drill Bit Size: #30Grip Range Min: .501"Grip Range Max: .625"