TISINO 1/4 inch TRS Stereo to Dual 1/4 inch TS Mono Insert Cable Y-Splitter Stereo Breakout Cable Patch Cord - 6.6 feet

Pay with

TISINO 1/4 inch TRS Stereo to Dual 1/4 inch TS Mono Features

• 1/4 stereo to dual 1/4 mono cable, This is an insert cable, generally used for audio consoles or other preamps that have a send/return on the tip/ring of a 1/4" TRS jack. It's a way to insert a component (like a compressor, EQ, etc.) directly inline with a preamp by using a single 1/4" jack.

• This "Insert" cable intended primarily for mixing/effects insertion applications, but it also can be used as a "Stereo Breakout Cable" since it is wired exactly the same way as a stereo breakout cable.This cable can also be used to split an unbalanced stereo signal into two unbalanced mono signals, or to combine two mono signals into a single stereo signal.

• The 1/4 TS connectors are color coded Black(Left/Send) and Red(Right/Return), It splits closer to the 1/4 TS ends, the distance to the split point is about 7.5 inches. Please make sure the power for all your equipmant is "OFF" when changing connections.

• 20 AWG 4N OFC Wire, High Density Shielding and Al-foil Shielded to Prevent EMI/RFI Interference ensuring the highest quality audio transfer without static, or popping.

• Heavy Duty Gold-plated 6.35mm connector resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss.

About TISINO 1/4 Inch TRS Stereo To Dual 1/4 Inch TS Mono

TISINO 6 feet 1/4 TRS Stereo to Dual 1/4 TS Mono Insert Cable Y-Splitter Cable This Insert cables are used for creating a real-time effects loop by connecting a channel insert on an audio mixing board to an external effects processor with 1/4" unbalanced connections. Connect the TRS plug into the "insert" jack of your mixing board. The tip of the jack is a send (sending a mono signal to an external effects professor) and the ring is the return (returning a mono signal from the external effects processor back into the mixing board). This cable can also be used to split an unbalanced stereo signal into two unbalanced mono signals, or to combine two mono signals into a single stereo signal. Features: - Heavy duty components. - High Grade Oxygen Free Copper (OFC) for effective EMI and RFI rejection and flexibility. - Durable and flexible PVC outer sleeve. - Cotton Yarn Wrap to reduce noise . - Inside aluminum foil shielding layer to reduce interference, for a better fidelity effect. - Gold Plated Reinforced Male Plug Delivers Preimum Quality Sound with Minnimal Interferance. - Low-Loss 98.5% Copper Braided Spiral-Wound Shield provides maximum cancellation of hum and noise. - Free velcro cable wrap included. - This full-featured cable has a soft PVC jacket for easy use and storage. - 4N Oxygen-free copper conductors are encased in bare copper braid shielding to provide pure sound that is noise free. Cable Specifications - Connector A: two 6.35mm TS Male - Connector B: 6.35mm TRS Plug - Cable Conductors: Bare Copper - Connector Contacts: Gold-plated - Braid Shielding: 98.5% Coverage - Jacket Material: PVC - Cable Gauge: 20 AWG - Cable Body Outside Diameter: 6.0mm - Length: 6Feet/2 Meters