tisino 1/4 to RCA Cable, Quarter inch TRS to RCA Audio Cable 6.35mm Stereo Jack to Dual RCA Insert Cable Y Splitter Cabl - 1.6 feet/50 cm

Pay with

tisino 1/4 to RCA Cable, Quarter inch TRS to RCA Features

• This RCA to 1/4 cable is designed to connect a channel insert on a mixing console to an effects processor with phone jacks; Connecting any devices with 6.35mm (1/4’’) audio ports to AV Receiver, speaker, amplifier and other RCA-enabled devices;it can be used as a stereo "splitter", or as a "insert" cable to add an outboard mono effects device (with unbalanced RCA input and output jacks) to an effects loop.

• This quarter inch to rca cable can be flipped around, 2 RCA or 6.35mm could all be the audio input, RCA to Stereo or Stereo to RCA;It splits closer to the rca ends, the distance to the split point is 7.5inchs, the red connector is right and blue connector is left.(Note:if you're input is red and white then use the blue in place of the white)

• High quality gold plated plug, Spring-style strain relief prevents cables from pulling out, corrosion resistant, 20 AWG 4N oxygen free copper wire combined with double shielding for best audio quality, excellent signal quality.

• Heavy Duty Flexible Rubber Jacket , Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response.

• 6.35mm(1/4 inch) TRS connector has 360 degree easy-grip treads for frequent unplugging and durability

About Tisino 1/4 To RCA Cable, Quarter Inch TRS To RCA

TISINO 1/4 inch TRS to 2-Male RCA Y Adapter Insert cable-1.6 FT These cables allow you to interface between 6.3mm Stereo and 2-RCA, so you can connect between speakers and audio devices that don't both have the same connection types. Features: - Heavy duty components. - High Grade Oxygen Free Copper (OFC) for effective EMI and RFI rejection and flexibility. - Durable and flexible PVC outer sleeve. - Cotton Yarn Wrap to reduce noise . - Inside aluminum foil shielding layer to reduce interference, for a better fidelity effect. - Gold Plated Reinforced Male 1/4" Plug Delivers Preimum Quality Sound with Minnimal Interferance. - Low-Loss 98.5% Copper Braided Spiral-Wound Shield provides maximum cancellation of hum and noise. - Free velcro cable wrap included. - This full-featured cable has a soft PVC jacket for easy use and storage. - 4N Oxygen-free copper conductors are encased in bare copper braid shielding to provide pure sound that is noise free. Cable Specifications - Connector A: 6.35mm TRS Male - Connector B: RCA Plug - Cable Conductors: Bare Copper - Connector Contacts: Gold-plated - Braid Shielding: 98.5% Coverage - Jacket Material: PVC - Cable Gauge: 20 AWG - Cable Body Outside Diameter: 6.0mm - Length: 1.6Feet/50cm