All Categories
This D6 nano drone has a loads of variety functions. 3D Flips Rolls, Altitude Hold, Headless Mode, One Key Take off/ Landing/ Return, 3 Speed Modes to fly, Etc. Please read the manual carefully before flying. Any problems, please feel free to contact us. FAQ Q1: How to fly these rc drones? Steps 1: Pair the drone. Make sure the drone and the controller are full charged, then put the drone on a flat surface, turn on the drone and the transmitter. Push the left joystick up, and pull it down. When you hear a "beep..", then the lights changed from flashes to constant light, which means it paired successfully. Steps 2(Optional): Calibrate the drone. It is recommended to calibrate the drone before taking off or after a crashed. Push the left joystick to the lower right corner, and the right joystick to the lower left corner, then the indicator light changed from flashes quickly to constant light, the calibration done. Steps 3: One key take off. Press the one key take off button, the drone takes off. then you can push the left joystick to adjust the flight height. Q2: How can I achieve 360 flips? A2: Press the top right button on the transmitter when flying and there will issue sound of "didi.", which indicates the drone enters flip mode. Then push the right joystick in the direction you want the flip and keep it there until achieve forward/backward/left/right tumbling. Specification Drone Battery: 3.7V 450mAh Lipo Battery (Built-in)Transmitter Battery: 3 * AAA Battery (Not Included)Flying time: 7-8mins Charging time: 50-60mins Control Distance: 50-70metersSize of the drone: 12.5*12.5*5cmWhat You Get 1 x Drone, 1 x Transmitter, 1 x USB Charging Cable 2 x Blades(1*blade A + 1*blade B), 1 x Screwdriver, 1 x Manual