uxcell 623ZZ Ball Bearing 3mm x 10mm x 4mm Double Shielded 623-2Z 80023 Deep Groove Bearings, Carbon Steel (Pack of 20)

Pay with

About Uxcell 623ZZ Ball Bearing 3mm X 10mm X 4mm Double

NOTE： Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description: Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. With small friction and high-limit speed, Uxcell's Deep Groove Ball Bearings are cost-effective and require little maintenance. Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness. Single-row, pre-lubricated, normal accuracy. Selection Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced NBR (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification: Model: 623ZZ Shield Type: Double Shield Material: Carbon Steel Cage Material: Stamping Steel Inner Diameter (d): 3mm Outer Diameter (D): 10mm Thickness (B): 4mm Dynamic Load Rating (Cr): 0.65kN Static Load Rating (Cor): 0.22kN Accuracy Class: P0 (ABEC-1) Number of Pack: 20 Pcs Weight: 32g