All Categories
Please note 1. Hardwired systems: Typically seen in new home buildings, hardwired systems require each switch, sensor or device to be centralised to one location through wiring it is advised that a professional design and install hardwired systems. Examples of hardwired home automation systems include C-Bus or simple switches 2.This kind of motorized window treatment is mostly supplied with 12V DC, It has a power cord that is plugged into a socket outlet. Wired slave motors are compatible with C-bus home automation or simple switches 3.This kit requires you to buy the roller shade rod and fabric, DC power cord, or connect your own automation system 4. Program Instruction inside the gift box, please check carefully when open it and prefer to send any message if there is problem Specifications -Motor length: 242.5cm -No load speed: 37rpm -Current consumption at nominal torque: 500mA -Nominal supply voltage: 12V -Minimum supply voltage: 9.5V -Maximum running time: NO Limit -Temp Working Range: 32°F to 140°F (0°C to 60°C) -Supply cable type(m㎡) 2x0.20 -Supply cable length with 2 meter Package Included 1 x 16mm Wired switch motor 1x Drive Wheel and crown for 0.827 inch/21mm round Aluminum tube 1x End cap and Bracket 1x Program Instruction, to show you how to program the limit setting Buyer requirements 1) What type of shade or window covering am I going to use? Roller Shade, Cellular, Pleated, Roman, Drapery etc 2)How are motorized window coverings powered? There are 3 types of motors: wirefree, plug-in low voltage, and plug-in high voltage 3) How would I like to control the window covering? IR-Remote, RF-Remote, Wall Switch, Touch Pad, IPad, Cell Phone, Automation etc