We specialize in hard to find items
All Categories
Sharpe Valves 53036 Series Stainless Steel 316 Ball Valve, Three Piece, Inline, Lockable Lever Handle, 2" Butt Weld
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
Sharpe Valves 53036 Series Stainless Steel 316 Ball Features
-
Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304
-
Lockable lever handle for manual on/off control
-
RPTFE 15% glass reinforced seats reduce the risk of leakage
-
Maximum pressure rating of 1000 psig for WOG and maximum working temperature of 450 degrees Fahrenheit
-
Butt-weld connections for a smooth bore and better fluid flow
About Sharpe Valves 53036 Series Stainless Steel 316 Ball
The Sharpe Valves 53036 series stainless steel 316 three-piece inline ball valve has a lockable lever handle and butt weld connections on both ends. It has an actuator ready ISO 5211 mounting pad for automation. This valve body is made of stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304. Stainless steel 316 is sometimes called "marine-grade stainless steel" due to its resistance to chloride corrosion. This valve has a lockable lever handle for manual on/off control. Reinforced polytetrafluoroethylene (RPTFE) 15% glass reinforced seats reduce the risk of leakage. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the connecting pipe for maximum operating efficiency. This valve has butt-weld connections, which are beveled to allow for a smooth bore and better fluid flow. The maximum pressure rating is 1000 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG), and the maximum working temperature is 450 degrees Fahrenheit. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball's position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications. Sharpe Valves manufactures a wide variety of valves, including stainless and carbon steel ball, gate, globe, and check valves. The company, founded in 1986 and headquartered in Chicago, IL, meets International Organization for Standardization (ISO) 9001:2008 standards based on Sharpe's design and manufacturing of valves.
