We specialize in hard to find items
All Categories
Smooth-Cast™ 300: Bright White, Low Viscosity, Liquid Plastic Casting Resin - Pint Unit
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Smooth-Cast™ 300: Bright White, Low Features
-
Easy-to-use casting resin that creates bright-white plastic reproductions in minutes
-
Pour into molds to create your own sculptures, arts & crafts, prototype models, theatrical props, & more!
-
Mix Ratio= 1A:1B by volume | No Scale & No Vacuum Degassing Required
-
Pot Life= 3 minutes | Full Cure Time= 10 minutes | Shore Hardness= 70 D
-
Fully cured castings are durable, machineable, & paintable
-
Perform a small-scale test & follow technical bulletin instructions at www. smooth-on.com
About Smooth-Cast™ 300: Bright White, Low
Smooth-Cast 300 is a ultra-low viscosity POLYURETHANE liquid plastic casting resin that creates bright white and virtually bubble free reproductions and models. Works great with Silicone Rubber Molds and Urethane Rubber Molds (release agent required). Vacuum degassing is not necessary. It offers the convenience of a 1A:1B by volume or 100A:90B by weight mix ratio, with a pot life of 3 minutes and cure time of 10 minutes. This casting resin readily accepts fillers (such as URE-FIL 3) and can be colored with SO-Strong or Ignite color tints that will mix with white finish to produce “pastel” colored castings. NOTE: Smooth-Cast 325 series (translucent amber) accepts pigments better than the Smooth Cast 300 series (white) - for color matching accuracy, use Smooth-Cast 325 series. Fully cured castings are tough, durable, machinable and paintable. They resist moisture and mild solvents. Applications for Smooth-Cast 300 include reproducing small to medium size sculptures, making prototype models, special effect props and decorative jewelry. IMPORTANT: Use in a properly ventilated area with at least room size ventilation. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Store and use materials in a warm environment (73°F/23°C). CAUTION: In case of eye contact, flush with water for 15 minutes. If irritation persists, get medical attention. For skin contact, wash with soap and water. Keep Out Of Reach Of Children.
