We specialize in hard to find items
(2)
TPI 196 High Resolution Process Control Digital Multimeter with 50000 Count Display, 50 Megaohms Resistance, 750V AC, 1000V DC Voltage, 1A AC/DC Current
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About TPI 196 High Resolution Process Control Digital
The TPI 196 digital multimeter (also known as a multitester) is an average-sensing, auto- and manual-ranging meter that measures current, voltage, and resistance, and performs continuity and diode tests in electrical applications. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit's diodes. Separate 10 amp and 500 microamp fuses protect the meter from damage. The meter provides statistical information such as minimum, maximum, compare, and relative mode. The relative mode stores a reading in memory to use as a zero point for subsequent readings so that multiple readings can be compared as a percentage of the stored reading, and is used for component checking. Compare mode compares the measured values with a stored value, and is used for component matching. Temperatures can be measured using a K-type thermocouple (not included). The data hold feature holds up to two readings on the display for recording. Auto power-off turns the meter off after 30 minutes of non-use to preserve battery life. The RS-232 output exports data to a computer while measurements are being taken (requires cable and software, not included). A molded rubber boot protects the meter against damage from falls, impacts, and abrasion, and a tilt stand provides viewing for one-handed operation.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The backlit LCD has a 50,000-count resolution, meaning it can display up to 49,999 units (4-3/4 digits) before the operating range needs to be changed. The display shows two readings simultaneously, and a 51-segment analog bar graph allows the user to observe fluctuations at a glance. The meter meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations, up to 1000V which covers most protected electronic equipment (such as small household appliances) and Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply), and Pollution Degree 2 for indoor use. The meter includes a test lead set, one 9V alkaline battery, a protective rubber boot, and instructions.SpecificationsMaximum AC and DC current10 ampMaximum AC voltage input750VMaximum DC voltage input1000VMaximum resistance detected50 megaohmsOther testsDiode and audible continuity sensorPower requirement9V battery, includedStandards metUnderwriters Laboratory- Canadian and U.S. Standards (cULus) 61010-1; International Electrotechnical Commission (IEC) safety standard 61010:2001; Category II installations up to 1000V; Category III installations up to 600V; Pollution Degree 2 for indoor useWeight14.4oz./380g including bootDimensions7.4 x 3.4 x 1.3 inches/187 x 86 x 33mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.Test Products International (TPI) manufactures test and measurement equipment such as oscilloscopes, manometers, multimeters, and test leads. The company, founded in 1997, is headquartered in Beaverton, OR.What's in the Box?TPI 196 digital multimeterTest leadRubber boot9V alkaline batteryInstructions
