We specialize in hard to find items
All Categories
CONFAST 3/4" (Inside/Screw 3/4" Diameter) Single Expansion Anchor (10 per Box)
Share Tweet
About CONFAST 3/4" (Inside/Screw 3/4" Diameter) Single
Applications The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick. Environment The anchor is designed for use in a Moist environment. Hole Diameter/Bit Diameter The anchor requires a 1-1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Minimum Embedment The minimum anchor embedment into the concrete is 2-3/4". Therefore, the anchor must be installed so that a minimum of 2-3/4" of the anchor is embedded into the concrete. Spacing between Anchors Each anchor must be spaced a minimum distance of 12-1/2" from each other when measured center to center. Edge Distance It is very important not to install the anchor any closer than 6-1/4" from an unsupported edge of the concrete.
