ALITOVE 16.4ft 300 LED WS2813 Individually Addressable RGB LED Strip Light Upgraded WS2812B Programmable LED Pixels Signal Break-Point Continuous Transmission Not Waterproof White PCB 5V DC

Pay with

About ALITOVE 16.4ft 300 LED WS2813 Individually

Parameter Model: AL-WS2813-300WH-NP Light source: 5050 RGB LED LED Qty: 60pcs per meter Wave length (NM): R,620~625nm ; G,515~525nm; B,465~475nm The gray level: 256 Color: full color (24-bit ) View angle:120° Voltage: DC 5V Power: 18W/M Waterproof: Not waterproof Dimension: 5000*12*4mm Package: 16.4ft/roll Life span:≥50000hrs Port scanning frequency reaches to 2KHz/s Data transmitting speed is up to 800Kbps Red wire: 5V+ / Black Wire: GDN / Yellow wire: Data / Green wire: Backup Data Parameter 1) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip. 2) Power supply need to be selected according to the total power of LED Strip. We recommend to use 80% max power of power supply. 3) It is better to inject power between each 5 meters when connect them in series in case of voltage drop. 4) Led strip is made by 50cm FPCB, so there is a solder point each 50cm on strip. But this minor flaw has no any bad effect on the strip's performance. In fact, most of the LED strips on the market are manufactured in half-meter lengths. Pin Function 5V: Power Voltage, connect to "+5V" DO: Control data signal output DI: Control data signal input BO: Backup control data signal output BI: Backup control data signal input GND: Data &Power Grounding Package 1x 16.4ft 300 pixels WS2813 led strip (Power supply and controller are not included) 1x Female 4PIN JST connector You may need these to make the LED strip work 5V 15A Power Supply: https://www.amazon.com/dp/B01LXN7MN3 5V 20A Power Supply: https://www.amazon.com/dp/B06XK2DDW4 SP105E Bluetooth Magic LED Controller: https://www.amazon.com/dp/B01LW1J10W T1000S LED Controller: https://www.amazon.com/