Rockville Micro Marine/ATV Amplifier 1600w Max 4 Channel 4x100/CEA Rated (RXM-S20)

Pay with

Rockville Micro Marine/ATV Amplifier 1600w Max 4 Features

• Rockville RXM-S20 Proton Series 1600w Peak/400w Dyno-Certified RMS 4 Channel Micro Marine/ATV Amplifier with PA Microphone Included!.

• PA Microphone with talkover - When you talk on the mic it will must the music and when you stop talking the music will come back on. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 300 Watts (4 x 75 Watts) at 4 ohms and 1% THD+N. 400 Watts (4 x 100 Watts) at 2 ohms < 1% THD.

• 400 Watts (2 x 200 Watts) bridged @ 4 Ohms < 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). Marine amplifier with conformal coated PCB board. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Double Sided Surface Mount (SMD) PCB Design . Selectable +6dB/+12dB Bass Equalizer @ 45hz.

• Channel Separation: 50 dB. Current drawn @ MAX RMS output: 27A @ 4ohm, 40A @ 2ohm. Efficiency @ MAX RMS output: 70% @ 4ohm, 63% @ 2ohm. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable. Input sensitivity: 200mV-6V. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. 8 Volt Preamp Circuitry.

• Status Mode LED Indicator. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. THD+A: 0.01%. Frequency Response: 15Hz - 20KHz. Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Continuously Fully Adjustable High Pass Crossover: 50HZ - 250HZ. CH1 & CH2 High Pass 50Hz - 250Hz. CH3 & CH4 Low Pass 50Hz - 250Hz. CH3 & CH4 High Pass 50Hz - 250Hz.

About Rockville Micro Marine/ATV Amplifier 1600w Max 4

The RXM-S20 is a marine amplifier that is perfect for many applications. This amplifier is water resistant so you can use it in a car or boat or any other application! The micro size of the amplifier also allows for installation in tight spots. The RSM-S20 is a 4 channel high power amplifier with 1,600 Watts peak output and 800 Watts RMS output (4 x 200 @ 2 Ohms). The CEA-2006 compliant rating is 60 x 4 @ 4 Ohms and 100 x 4 @ 2 ohms We put our newest technology into this amp! It is a class A/B full range micro amplifier and runs very efficiently. Full size class A/B generally run at about 50% efficiency depending on the quality of the particular amp. This one is able to run at around 70% efficiency due to the high quality of the parts we use to build these.