"AC220-50SP" Motorized Actuators(Excluding Ball Valve) – AC 210-240V by VALCON (AC 220V (Waterproof), 5-Wire(6 N.M), 1)

Pay with

"AC220-50SP" Motorized Actuators Features

• VALCON is an electric ball valve used instead of a solenoid valve that leaks due to sludge.

• VALCON is an actuator ball valve that can observe the operating state when water is shut off.

• VALCON is a valve that can flow control and direction control with a stronger force than a pneumatic actuator.

• VALCON can be opened and closed types of with a water valve and an air valve.

• VALCON is applied and used in various places such as washing machine, shower, drain, sprinkler, fuel cell, ice maker, control device, heating, irrigation, etc.

About "AC220-50SP" Motorized Actuators

Description Actuator Model: AC220-50SP Control : AC Contact point control Power : AC 210~240V 50/60Hz Consumption Power : Approx. 26W (in operation) Standby Power : Approx. 1.3W (in completed) Max. Output torque : 60Kgf‧cm Weight : Approx. 535g Rotation Direction : Opens Counter-clock-wise / Closes clock-wise (TOP VIEW) Operating time : Approx. 4sec (90° operating basis) Mechanical Life Span : Approx. 100,000 Cycles Operation Environment : indoor with no condensation IP Rating : IP 67 Certification : CE, RoHS Operation Temperature (Humidity) : -15℃~50℃ (35 ~ 85% RH) Wiring method ● One of the AC supply lines is connected to the red line. ● When the remaining 1 of the AC supply lines is connected to the white line, the actuator operates to open, and when it is connected to the black line, the actuator operates to close. ※ The yellow line and green line are used for the operation completion confirmation device, and there is no problem in opening / closing the electric actuator without using it. (Insulate the unused wires with insulation tape or a suitable material with the same function to prevent short-circuiting) Installation Specifications 1. Compose system that can control by close-operating Red(AC conductor), black (AC conductor) / Open-operating Red (AC conductor), white (AC conductor) 2. The open/closed status of the electric ball valve can be checked using the yellow line and the green line 3. Attach the power supply unit with a switch or disconnecting device for emergency power off 4. Connect an overcurrent cut-off device to the power supply for circuit protection CAU TION 1. Be sure to read the product manual enclosed in the product before installation. 2.Refer to the wiring diagram of the electric actuator for wiring carefully.