We specialize in hard to find items
All Categories
CERRXIAN 1FT DC 5V to DC 12V USB Voltage Step Up Converter Cable,Power Adapter Cable with DC 5.5 x 2.1mm Jack,USB 5V 2A to DC 12V 0.8A Cable
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
CERRXIAN 1FT DC 5V to DC 12V USB Voltage Step Up Features
-
USB to DC5521 Voltage Step Up Converter Cable can be applied to many 5V power supplies, the most common is the mobile power supply, which can convert your 5V 2A power supply to 12V 0.8A power output
-
USB input: 5V 2A male interface, please ensure that the current is 2A, otherwise the device may not work. Note: Not suitable for high-current devices, only for charging, not for data transmission
-
DC 5521 output: 12V, maximum current: 0.8A, it is an IC circuit, which limits its output to protect your equipment. Please check the output device before buying. If the product uses a current greater than 1A, it cannot be used. Note: DC prompt polarity: internal positive (+), external negative (-)
-
Each cable has a built-in intelligent protection IC circuit. Our voltage adapter can provide comprehensive protection for your equipment to prevent over voltage, over current, overload or short circuit.
-
Suitable for various devices that require 12V power supply, Wi-Fi routers, illuminators, Bluetooth speakers, GPS and other devices, etc.
About CERRXIAN 1FT DC 5V To DC 12V USB Voltage Step Up
1. Plug and play, this 5V to 12V DC converter is very convenient when traveling or outdoors, just use a 5V 2A mobile power supply to power it, and you can start running 12V devices. 2. The USB to DC5521 Voltage Step Up cable just converts 5V 2A into 12V 0.8A, by increasing the voltage, reducing the current. The overall power has not changed 3. Before buying, please check your device first, you can find the specifications on the back or bottom of the device, just check if it fits our cable 4. The boost cable supports the recommended maximum 5V 2A input and 12V 800mAh output. 5. Please make sure the power supply is enough 2A. Do not exceed the high voltage required by the equipment. If the device requires 3A, this device will not work. If you only need 0.1A (100Mha), the current of the adapter is too high. It may also not work on your device 6. Red LED indicator, the indicator light is always on when working 7. When the current is found to be lower than the normal specification, please check whether your input or output exceeds the limit 8. Specifications: . Wire gauge: 20AWG . Length 0.3M/1FT (manual measurement, there may be a little error) . Input voltage: 5V DC±0.2V . Input maximum current: 2A . Output voltage: 12V DC±0.5V . Maximum output current: 0.8A . Input port: USB2.0 male interface . Output port: DC5521 male interface 9.Packaging: 1 X USB to DC 5521 Voltage Step Up Cable
