All Categories
Get it between 2024-12-31 to 2025-01-07. Additional 3 business days for provincial shipping.
【Plug and Play】: This LED motorcycle gear indicator is plug and play. The motorcycle has a reserved ECU socket, just plug it in, quickly connect, no need to cut the wire, the shift indicator display can be mounted anywhere.
【Non-destructive Installation】: To find the gear display plug as Smoku technology to the product and then connected to a power line and speed signal line is inserted in the tank below! When the monitor is in place,check that the cable is not subject to steering damage!
【Module Settings】: You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear. Raise the rear wheel off the ground by using a stand, and start the engine in Neutral. The screen displays L, indicating that learning is started.
【Gear Display】: Accelerate through the handle throttle slowly. The display will blink “1”. Select first gear, release the clutch, and keep the RPM above idle speed. The display is blinking faster while the unit is learning the gear. When the display shows “2”, select second gear. Repeat this process until all gears are thought (5 or 6). The gear can be indicated correctly. Now, when ignition is turned on, the display counts forward (1 to 6) indicating that it is fully functional.
【After-sales Service】: Please confirm whether your model is suitable before shopping. If you do not know whether your motorcycle is suitable, or if you are not sure about the installation process after purchase, do not hesitate and contact us immediately.