We specialize in hard to find items
All Categories
CHANCS 12V/24V 10000RPM/20000RPM 775 Electric Motor Table Saw Kit with 20A PWM Speed Controller Regulator Module Board
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
CHANCS 12V/24V 10000RPM/20000RPM 775 Electric Motor Features
-
*This is a DIY combination of a mini saw. Contains motor, bracket, B10 drill chuck, saw blade, and 20A DC Motor Speed Controller.
-
*The specification of motor: Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A, Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm.
-
*The specification of PWM: Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)? Output voltage: linear under load? Control Power: 0.01-1200W? Rated Current: 10A? Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)? PWM Duty Cycle: 0%-100%? PWM Frequency: 25Khz? Product Size(L x W x H): 77*45*28mm?
-
*The specification of bracket: Length: 50mm,Width: 52mm,Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm.
-
*Attention: At DC 12V the motor speed and cutting force is less than at DC 24V. We recommend that you use DC 24V for cutting materials, especially if the material is hard and the motor may not work very well with DC 12V.
About CHANCS 12V/24V 10000RPM/20000RPM 775 Electric Motor
*This is a DIY combination of a mini saw. Contains motor, bracket, B10 drill chuck, saw blade, and 20A DC Motor Speed Controller. *The specification of motor: Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A, Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm. *The specification of PWM: Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)? Output voltage: linear under load? Control Power: 0.01-1200W? Rated Current: 10A? Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)? PWM Duty Cycle: 0%-100%? PWM Frequency: 25Khz? Product Size(L x W x H): 77*45*28mm? This is a DC 10V-60V 20A DC Motor PWM Speed Controller,Its own power supply reverse polarity protection, control voltage over-voltage protection, 20A fast-blow ceramic fuse. *The specification of bracket: Length: 50mm, Width: 52mm, Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm. *Attention: 1.Before use to ensure that there is no gap between the saw blade and the spindle, tighten the nut. 2.Please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 3.This speed regulator is for use with DC brushed motors. It is NOT suitable for speed regulation of DC brushless motors; nor can it be used as a voltage regulator or voltage stabilizer! 4.Positive and negative pole of the POWER and the MOTOR can NOT be reversed. 5.At DC 12V the motor speed and cutting force is less than at DC 24V. We recommend that you use DC 24V for cutting materials, especially if the material is hard and the motor may not work very well with DC 12V.
