ANYCUBIC 3D Printer Resin, 405nm UV Plant-Based Rapid Resin, Low Odor, Photopolymer Resin for LCD 3D Printing, 500g Tran-Green

Pay with

ANYCUBIC 3D Printer Resin, 405nm UV Plant-Based Features

• ✦Excellent Use Effect: The model printed with ANYCUBIC resin has very pure and amazing color effects, presenting you a more perfect printed model.

• ✦High-speed Solidification: The resin can ensure the strength of the molded part without excessive shrinkage, shorten the curing time, and ensure the high precision and smoothness of the printed model.

• ✦Environmental Protection & no peculiar smell: Using soybean oil as raw material, the source is green and environmentally friendly, with ultra-low odor. No VOC, no BPA, no irritating and harmful chemical substances in line with EN 71-3:2013 safety standards.

• ✦High Compatibility: 355nm-410nm wide band, suitable for most LCD/DLP light curing 3D printers, its excellent stability ensures the printing experience and successful printing.

• ✦Storage Instructions: It is recommended to store in a dry, dust-free place at 15°C-35°C, sealed and stored, and avoid direct sunlight, which will affect the quality of the resin.

About ANYCUBIC 3D Printer Resin, 405nm UV Plant-Based

Usage condition Shake up the bottle before use and avoid direct sunlight and dust. Wear a mask and gloves to avoid direct skin contact and maintain indoor ventilation. Recommended usage temperature: 20-25℃. Once the model is complete, please wash it with ethanol alcohol for at least 30 seconds or with dish wash liquid solution. Attention When printing large model, please increase the build plate contact of the model or lower the infill density to avoid wrapping. Wash with plenty of water immediately if got accidently skin contact. If feel discomfort after you got skin contact, please see a doctor ASAP. Do not drink it and keep it sealed and out of the reach of children Storage Store in a dry and dust-free place under 15℃-35℃. Keep it sealed and keep it away from sunlight.