All Categories
Instruction For Use: 1. It can be placed on any smooth clean and dry surface like shelf, board, wood cabinet,drawer,walls,window,glass etc. It is best applied at room temperature. 2. Sand down rough surfaces prior to sticking. Clean large surfaces with mild soap and water. 3. Measure the surface to cover. Cut the film into right size, leaving about 5cm extra overlap on all edges is beter. 4. Peel off the backing paper evenly with one hand whilst smoothing the film to the surface. With your other hand, from the center to edges. For this it's better to use a soft cloth. 5. Creases and air bubbles can be removed by applying light pressure from the center to the edges. Pierce stubborn bubbles with a needle and squeeze the air out. The material can be cut to size with scissors for custom applications depending on the requirement. ■ Color may look different for each monitor. Since computer screens have chromatic aberration we can not guarantee that the color of our products will be exactly the same with the photographs. REMINDS: 1. The color tone varies depending on the room lighting. The wall picture is for reference only. 2. Buy enough rolls at a time to make sure they come from the same batch to avoid color differences. 3. The wallpaper you will receive may have some wrinkles or ends, but it does not affect the look after using on a dry flat surface.