We specialize in hard to find items
All Categories
CNC Spindle Motor Kit, MYSWEETY 110V 2.2KW Water Cooled Spindle Motor + 2.2KW Single to 3 Phase VDF+110v Water Pump + 3.15 Inch Clamp + 196 Inch Water Pipe + 40 Inch Electric Wire+ 13pcs ER20 Collet
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
CNC Spindle Motor Kit, MYSWEETY 110V 2.2KW Water Features
-
✅【Spindle Technical Parameters】Spec: Φ2.39 x 11.37 in (Diameter: 7.2 cm x Length: 28.9 cm) Power: 2.2 KW; Voltage: 110V; Current: 8.5A; Collet Size: ER20; Bearings: 4 bearings,（2x7005C P4 DT, 2x7003C P4 DT, increase spindle life）Frequency: 400 Hz; Speed: 0-24000 R/min; Runout off: less than 0.0015 mm; Weight: 11.46 ib. Mainly used for engraving machine or used with frequency converter.
-
✅ 【VFD Inverter】 Power: 2.2 KW; Input Voltage: 110 V; Output Voltage: 110 V; Input Phase: 1 phase or 3 phase; Output Phase: 3 phase; Input Frequency: 50 Hz; Output Frequency: 0-400 Hz; Output Current: 5A. supports multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting,ect; DC cooling fan low noise, large air volume. Perfect match with the water cooled spindle motor!
-
✅【Energy-efficient Water Pump】Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60HZ, Size: L4.8xW3.5xH4.3 in. This is a high-performance, save time and effert pump and is well-designed for use in spindle, structure is compact and four powerful rubber suction cups can absorb shock and prevent fall off. The faucet is made of brass: great quality, durable and does not rust.
-
✅【 Package include】① 1 x 110V 2.2KW Spindle Motor ②1 x 110V 2.2KW VDF Inverter ③1 x 110V 75W Water Pump ④1 x 196 in Water Pipes ⑤1 x 3.15 in Spindle Clamp ⑥2 x Wrench ⑦ 1 x 40 in wire ⑧ 10 x Drill Bits ⑨13 x ER20 Collet Set Gripping Range
-
✅【 Support】 Covered by 1-year manufacturer warr anty. If you get stuck, contact us with any questions that arise, your satisfaction is important and we'll work to resolve your issues.
About CNC Spindle Motor Kit, MYSWEETY 110V 2.2KW Water
1.Spindle Motor: Size: 80mm Power: 2200W Voltage: 110V Frequency: 0-400Hz Speed: 0-24000rpm Water Cooling ER20 collet Runout off: less than 0.001mm Germany SKS 4pcs bearing Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT Grease Lubrication Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground 2.Inverter: Type: 2.2KW/110V Input: 110VAC/50Hz Output: 0-220VAC 3-phase Frequency: 0-400Hz Size: 168x124x161mm 3.ER20 Collet Set: Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm) Run-out tolerance 0.01mm (0.0006") 4.Water Pump: Voltage: 110V Structure: Single-stage Pump Pressure: High Pressure Application: Submersible Usage: Water 5.5M Water Pipes: Length: 5M Can be connected between Water Pump and Spindle Motor 6.Spindle Motor Clamp Mount: Diameter: 80mm Material: Aluminum,Surface sandblasted Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producing Package include: 1 x 110V 2.2KW Spindle Motor 1 x 110V 2.2KW VFD 1 x 110V 75W Water Pump 1 x 5M Water Pipes 1 x 80mm Spindle Clamp (Free 3pcs screws) 13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm) 1 x 70mm Brush 10 x Drill Bits How to connect: The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.
